4593HE

1.4" Coaxial Neodymium Compression Driver

  • Extended Bandwidth (300 – 22000 Hz)
  • Neodymium Magnet Assembly
  • Additional shorting rings for lower distortion
  • With two Subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
  • Excellent Phase Coherence
  • Perfect Time Alignment without Problems of Multi-Source Interference
  • Ultra light Weight and small Size
  • 8 or 16 Ohm

Specification

4593HE Specification

Throat diameter: 1.4″ (36 mm)
Nominal impedance: 8 or 16 Ohm
Power capacity:
Middle Range (AES): 150 W AES above 400 Hz
Peak: 1000 W peak above 500 Hz
High Range (AES): 80 W
Peak: 320 W
Sensitivity 1 W / 1 m: 118 dB on 40° x 20° Horn
Frequency Range: 300 – 22000 Hz
Recommended Crossover: 300 Hz
Middle Frequency Range: 300 – 7000 Hz
High Frequency Range: 6000 – 22000 Hz
Middle /High Crossover: 6300 Hz
Voice Coil High-Range: 1.75″ (44.4 mm)
Voice Coil Mid-Range: 3.5″ (90 mm)
Magnet Material: Neodymium
Middle Frequency Flux Density (Tesla): 1.95
High Frequency Flux Density (Tesla): 2
Efficiency: 35 % (300 – 5000 Hz)
Voice Coil Material: Copper Clad Aluminum
(2 Layers in- and outside of the VC)
Voice Coil Former: Kapton TM
Diaphragm Material: Polyester

Mounting & Drawing

4593HE Drawing

4593HE Mounting Information

Overall Diameter: mm 133 (+/- 0.3 mm)
Depth: mm 111.2
Net Weight: kg 2.5
4 x M6 Holes, 90° on 101.6 mm, 4″ Diameter

Curves

4593HE Curves

Downloads

Downloads